The Science of Wax

Alternatives to Incralac for protecting outdoor bronze sculpture

Conservator Julie Wolfe adds protective coatings to a sculpture.

Julie Wolfe applying coatings to Running Man, 1978, Dame Elisabeth Frink. Bronze, 75 x 51 x 25 ¾ in. Getty Museum, 106.2, Gift of Fran and Ray Stark, 2005. Sculpture © Estate of Elisabeth Frink

By Tristan Bravinder

Aug 24, 2017

Social Sharing

Body Content

Julie Wolfe, a conservator at the Getty Museum, is wrapping up several years of research on coatings used to preserve the outdoor sculptures in the Fran and Ray Stark Collection.

Coatings used for outdoor bronzes at the Getty fall into two categories—wax and acrylic—and Julie has been reviewing the history of these different types and testing them on swatches. Much of her attention has been focused on the proprietary acrylic coating Incralac, which was developed in the 1960s specifically for copper alloys. Incralac was designed for industrial use and has been widely adopted for art conservation—but because it is toxic and may be difficult to remove, conservators disagree about the advisability of its use.

Because of this lack of consensus in the field, Julie has been systematically exploring the pros and cons of Incralac, learning the development of the original formulation, and reviewing published performance testing on the product. Simultaneously, she has been creating a substitute that can be made in-house without the high level of toxic solvents. An Incralac alternative is increasingly in demand due to both environmental concerns and constantly changing regulations.

This issue began to concern Julie in 2005, when she was charged with creating a maintenance plan for over two dozen outdoor sculptures that the Getty Museum had acquired. The bronzes all had Incralac coatings that were 20 years old—even though the coating should be replaced every 10 years. Since then, she has been working tirelessly to remove the aging acrylic coating on each sculpture and using this as an opportunity to study the Incralac coating and alternatives.

Through her work Julie is hoping to fill a gap in practical research on coatings for outdoor sculptures and monuments. Much of the existing research, she notes, focuses on industrial use, and each artwork presents its own unique set of materials, surfaces, and challenges. For example, Incralac may have a different performance on a polished copper architectural element compared to a patinated bronze surface applied by the artist’s foundry or perhaps a weathered surface from outdoor exposure.

With the collaboration of Getty Conservation Institute scientists, Julie’s findings on the history of Incralac will be published in a paper this fall with the Journal of the American Institute for Conservation. At the International Council of Museums–Committee for Conservation (ICOM-CC) conference in Copenhagen this September, she shared her research on the development of an in-house non-toxic Incralac alternative—available through the Journal of the American Institute for Conservation.

For more on Julie’s work with the conservation of outdoor sculpture, read about recent conservation efforts on a Barbara Hepworth bronze. For a deeper dive, Julie points to materials produced by the National Park Service on preserving outdoor sculpture and monuments. If you work on the conservation of outdoor sculpture and monuments, she would love to be in contact.

Back to Top

Stay Connected

  1. Get Inspired

    A young man and woman chat about a painting they are looking at in a gallery at the J. Paul Getty Museum.

    Enjoy stories about art, and news about Getty exhibitions and events, with our free e-newsletter

  2. For Journalists

    A scientist in a lab coat inspects several clear plastic samples arrayed in front of her on a table.

    Find press contacts, images, and information for the news media